Investigation of Drilling Process Parameters of Palmyra Based Composite
The drilling process is the most essential in the final assembly of the mechanical parts. Natural fiber based composites replace traditional materials due to their advantages, such as strength to weight ratio, availability, and environmental hazards. In this work, an attempt has been made to find th...
Guardado en:
| Autores principales: | , , , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Hindawi Limited
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/09655c18d54f425d9ad5607e22e4c83a |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | The drilling process is the most essential in the final assembly of the mechanical parts. Natural fiber based composites replace traditional materials due to their advantages, such as strength to weight ratio, availability, and environmental hazards. In this work, an attempt has been made to find the minimum thrust force produced by the drill tool at specified drilling process parameters. The drilling process parameters used for the investigation are rotational speed, tool feed, and resins. The spindle speed and feed rate are selected with three levels. Three resin materials were used, namely, epoxy, polyester, and vinyl ester. Taguchi’s L27 orthogonal array was implemented. The result shows that the candlestick drill bit generated lesser thrust force at the specified drilling process parameters, followed by the twist and step cone drill bits. |
|---|