Experimental determination and ray-tracing simulation of bending losses in melt-spun polymer optical fibres
Abstract The damping properties and specifically the bend losses of polymer optical fibres (POFs) have so far only been documented by experimental work, investigating bending parameters such as bending radius, length, and distance of the bends. Even though damping mechanisms and causes are well-know...
Guardado en:
| Autores principales: | , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Nature Portfolio
2020
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/0c0102c1af854ee98450249b5378b2cb |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract The damping properties and specifically the bend losses of polymer optical fibres (POFs) have so far only been documented by experimental work, investigating bending parameters such as bending radius, length, and distance of the bends. Even though damping mechanisms and causes are well-known, no simple, generally valid formula exists. Here, a simulation technique is shown that allows producing an optical model for any bending geometries of melt-spun polymer optical fibres. The developed model takes all relevant loss mechanisms into account, especially regarding the scattering losses at the interface of core and cladding as well as those of the cladding-air interface. The latter is caused by interfacial roughness for which experimental data have been obtained by atomic force microscopy measurements. To show the validity of the simulation, the model is compared to experimental results for several fibres and a variety of geometries. The variance between model and experimental data is low (S < 4.6%). The model not only contributes to improving the understanding of the optical properties of POFs, but it also has direct applicability to the design of photonic textile sensors for medicine, where the fibres are incorporated with small bending radii. |
|---|