Influence of technical parameters on the structure of annular axis braided preforms
A modified vertical braiding machine and closed annular axis mandrels with a special-shaped cross section were used to braid annular axis preforms under four different technical parameters. After measuring the braiding angles and yarn spacing of the braided preform in different areas of the mandrels...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
De Gruyter
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/17a469e512004f3d98b69dea82b488b8 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | A modified vertical braiding machine and closed annular axis mandrels with a special-shaped cross section were used to braid annular axis preforms under four different technical parameters. After measuring the braiding angles and yarn spacing of the braided preform in different areas of the mandrels, it was found that the braiding angle increased by 20.9% and the yarn spacing decreased by 19.8% when the speed of the yarn carrier was doubled. The braiding angle decreased by 31.1% and the yarn spacing increased by 28.6% when the rotation speed of the mandrels was doubled. The results show that the rotation speed of the mandrel has a slightly greater influence on the braiding angle and the yarn spacing. By using the modified braiding machine to braid the annular axis preforms, multi-layer continuous braided preforms can be achieved on compact equipment. And the structure of the annular axis braided preforms can be changed by changing the technical parameters. |
|---|