Investigation on cross sheeting thickness and its width in strengthening of steel shear wall under seismic load
The steel shear wall, as a system to resist the lateral loads, buckles when it is vulnerable to the lateral loads applied to the frame before it reaches its ultimate strength. This phenomenon is due to the small thickness of shear wall relative to the adjacent beam and column. Hence, the idea of rei...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | FA |
| Publicado: |
Iranian Society of Structrual Engineering (ISSE)
2019
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/213fa927fedc4fd7ab373578c461252f |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | The steel shear wall, as a system to resist the lateral loads, buckles when it is vulnerable to the lateral loads applied to the frame before it reaches its ultimate strength. This phenomenon is due to the small thickness of shear wall relative to the adjacent beam and column. Hence, the idea of reinforcing shear wall to control the sheet buckling seems to be quite applicable. In this research, cross sheet have been used to increase loading capacity of reinforced sheets, which are attached to the both sides of the steel shear wall. In this regard, at first the steel shear wall was modeled according to Qomy experimental model. After verification of the developed model conducted by comparing with the results from laboratory test, parametric study was carried out on the thickness and width of the reinforcing sheet. The obtained results of the analysis showed that by increasing the sheeting thickness to 1.5 times, shear strength is enhanced by 7%. Increasing the sheeting width by 1.5 times shear stiffness and shear strength are decreased by 42% and 32% respectively and decreasing of this parameter by 50% leads to decrease of shear strength by 8%. According to the obtained results for the verification model, numerical and experimental results are in good agreement. |
|---|