Research on materials of solar selective absorption coating based on the first principle
Based on the first principle, this paper studies the optical properties of Ni, Mo, CoO, and Cr2O3 according to the Materials Studio software. It is found that the absorptivity of Ni is low, while Ni has low emissivity. Hence, it can be used to reduce emissivity. The absorption rate of CoO is very hi...
Enregistré dans:
| Auteurs principaux: | , , , |
|---|---|
| Format: | article |
| Langue: | EN |
| Publié: |
De Gruyter
2021
|
| Sujets: | |
| Accès en ligne: | https://doaj.org/article/2489c9ef05494367b8f29a86b01adc5b |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| Résumé: | Based on the first principle, this paper studies the optical properties of Ni, Mo, CoO, and Cr2O3 according to the Materials Studio software. It is found that the absorptivity of Ni is low, while Ni has low emissivity. Hence, it can be used to reduce emissivity. The absorption rate of CoO is very high. Therefore, Ni and CoO are very suitable to be composed to make a solar selective absorption coating with high absorptivity and low emissivity. The mass ratio of Ni and CoO has a greater impact on the optical properties of the composite material, so the absorption–emission ratios of the composite material Ni–CoO at different mass ratios are calculated. The absorption–emission ratio is the highest when the mass ratio is 1:1, and the performance is the best, which is in good agreement with the result of the experiment. And we hope that our method will provide some help for the study of solar selective absorption composite coatings. |
|---|