Characterization of Metal Dispersion of Some Naphtha Reforming Catalysts by Methylcyclohexane Dehydrogenation Reaction

The dispersion of supported Pt and PtIr reforming catalysts have been studied, after treatment with oxidative and reducing atmosphere. Methylcyclohexane dehydrogenation reaction in the absence of hydrogen was used as a test reaction. An attempt was made to relate the behavior of the catalysts upon s...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autores principales: Ameel Mohammed Rahman, Ahmed J. Ali
Formato: article
Lenguaje:EN
Publicado: Al-Khwarizmi College of Engineering – University of Baghdad 2009
Materias:
Acceso en línea:https://doaj.org/article/314387a29a914d9aa235cfc8a3ccfcf1
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
Descripción
Sumario:The dispersion of supported Pt and PtIr reforming catalysts have been studied, after treatment with oxidative and reducing atmosphere. Methylcyclohexane dehydrogenation reaction in the absence of hydrogen was used as a test reaction. An attempt was made to relate the behavior of the catalysts upon subject to reaction, to the dispersion of the same type of catalysts upon treatment with similar atmosphere and temperatures which appeared in literature. The total conversion of reaction can be explained by a change in metal dispersion. Thus, methylcyclohexane dehydrogenation reaction appears to be a really structure sensitive reaction. <br />The toluene yield increases as the oxidation temperature increases over the studied catalyst RG-402, RG-412, RG-422 and RG-432 respectively and reached a maximum value at 550°C. Above 550 the conversion decreases due to the effect of catalyst sintering. <br />No significant change were observed for reduction temperature range 400-600°C for the above studied catalysts.<br />The selectivity order for the studied catalysts and for reduction treatment experiments arranged as follows:<br />RG-422> RG-432> RG-412> RG-402<br />