Reducing Cr6+ in electroplating wastewater with Bacillus cereus strain B1

In this study Bacillus cereus was used to evaluate the Cr6+reducing capacity in electroplating effluents. The Cr6+bioreduction assays were carried out using real wastewater (RWW) from an electroplating plant and artificial wastewater (AWW), with and without added glucose. The AWW was prepared us...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autor principal: Jennifer Andrea Moreno-Benavides, Enrique Javier Peña-Salamanca, Neyla Benítez-Campo
Formato: article
Lenguaje:EN
ES
Publicado: Pontificia Universidad Javeriana 2019
Materias:
Acceso en línea:https://doaj.org/article/32bc7ade996f486693ad0b449ce90447
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
Descripción
Sumario:In this study Bacillus cereus was used to evaluate the Cr6+reducing capacity in electroplating effluents. The Cr6+bioreduction assays were carried out using real wastewater (RWW) from an electroplating plant and artificial wastewater (AWW), with and without added glucose. The AWW was prepared using Ni, Zn, Cu, Pb, and Cr salts, simulating RWW concentrations. The Cr6+concentration and bacterial growth were monitored three times a day for the duration of five days. Also, were evaluated the effects of wastewater on B. cereus B1 morphology using scanning electron microscopy. Cr6+reduction percentage of 100 % was reached for AWW containing glucose, of 71 % for AWW without glucose, of 75.6 % for RWW with glucose, and of 31.7 % for RWW without glucose. Despite the low reduction percentage obtained for RWW without glucose, concentrations of ± 0.14 mg/L of Cr6+were reached, which were within allowed limits (0.5 mg/L of Cr6+). Electron Microscopy showed alterations in the bacterial cell wall and a decrease in size, mainly in the bacteria exposed to RWW. The results allow us to propose B. cereus B1 as a promising microorganism for use in the bioremediation of effluents containing Cr6+.