Water loss in swimming pool filter backwashing processes in the Balearic Islands (Spain)
Swimming pools are a major contributor to water consumption in our community. However, the high water loss associated with filter cleaning is unknown. In this work, we investigate the current procedures for filter backwashing in public swimming pools by questionnaires to owners and managers. Then, w...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
IWA Publishing
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/368098ca035d4421a448e603f3705e5b |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Swimming pools are a major contributor to water consumption in our community. However, the high water loss associated with filter cleaning is unknown. In this work, we investigate the current procedures for filter backwashing in public swimming pools by questionnaires to owners and managers. Then, we use the collected data to estimate their environmental and economic costs. Besides, we measure several parameters in the field during the process performed in four representative swimming pools. The investigation revealed that the water loss associated with filter cleaning in public swimming pools rises to 5.5 million m3 water per year, which represents an expense of 13.96 million €. Based on our results, the followed protocols were inappropriate in most cases, indicating that even the required water amount would be higher. The most suitable parameters for filter backwashing monitoring were combined chlorine, ammonium, turbidity and chemical oxygen demand (COD). The necessity for specific strategies and legislation for the management of these installations, the treatment of the generated wastewater, as the implementation of different technological solutions to reduce water loss are discussed. HIGHLIGHTS
Water loss from filter backwashing in our community is huge.;
Current filter backwashing practices are insufficient and should be improved.;
The most suitable parameters for filter backwashing monitoring are combined chlorine, ammonium, turbidity and COD.;
Official parameters and limits for backwashing monitoring are needed.;
Water-saving strategies should include water reuse and technological improvements.; |
|---|