Mechanical Properties of Burnished Steel AISI 1008
Burnishing improves fatigue strength, surface hardness and decrease surface roughness of metal because this process transforms tensile residual stresses into compressive residual stresses. Roller burnishing tool is used in the present work on low carbon steel (AISI 1008) specimens. In this work, di...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Al-Khwarizmi College of Engineering – University of Baghdad
2018
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/36ab8a978e984a4997b1541b8eb7aed9 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| id |
oai:doaj.org-article:36ab8a978e984a4997b1541b8eb7aed9 |
|---|---|
| record_format |
dspace |
| spelling |
oai:doaj.org-article:36ab8a978e984a4997b1541b8eb7aed92021-12-02T07:32:58ZMechanical Properties of Burnished Steel AISI 100810.22153/kej.2018.06.0051818-11712312-0789https://doaj.org/article/36ab8a978e984a4997b1541b8eb7aed92018-12-01T00:00:00Zhttp://alkej.uobaghdad.edu.iq/index.php/alkej/article/view/66https://doaj.org/toc/1818-1171https://doaj.org/toc/2312-0789 Burnishing improves fatigue strength, surface hardness and decrease surface roughness of metal because this process transforms tensile residual stresses into compressive residual stresses. Roller burnishing tool is used in the present work on low carbon steel (AISI 1008) specimens. In this work, different experiments were used to study the influence of feed parameter and speed parameter in burnishing process on fatigue strength, surface roughness and surface hardness of low carbon steel (AISI 1008) specimens. The first parameter used is feed values which were (0.6, 0.8, and 1) mm at constant speed (370) rpm, while the second parameter used is speed at values (540, 800 and 1200) rpm and at constant feed (1) mm. The results of the fatigue test showed that improvement in fatigue limit, where the highest fatigue limit was obtained at (1mm feed, 1200rpm speed) in burnishing process which was (169 Mpa). The hardness results, showed increasing feed and speed values lead to increasing the hardness. The burnishing process reduces surface roughness by producing accurate and better surface finish. The best surface fineness of metal at (1mm feed and 1200 rpm speed) was 0.11 μm. Zeyad D. KadhimMohammed Abdulraoof AbdulrazzaqWassan Suheil HussainAl-Khwarizmi College of Engineering – University of Baghdadarticleburnishing process, Fatigue properties, low carbon steel (AISI 1008), surface hardness of low carbon steel, surface roughness of low carbon steel.Chemical engineeringTP155-156Engineering (General). Civil engineering (General)TA1-2040ENAl-Khawarizmi Engineering Journal, Vol 14, Iss 4 (2018) |
| institution |
DOAJ |
| collection |
DOAJ |
| language |
EN |
| topic |
burnishing process, Fatigue properties, low carbon steel (AISI 1008), surface hardness of low carbon steel, surface roughness of low carbon steel . Chemical engineering TP155-156 Engineering (General). Civil engineering (General) TA1-2040 |
| spellingShingle |
burnishing process, Fatigue properties, low carbon steel (AISI 1008), surface hardness of low carbon steel, surface roughness of low carbon steel . Chemical engineering TP155-156 Engineering (General). Civil engineering (General) TA1-2040 Zeyad D. Kadhim Mohammed Abdulraoof Abdulrazzaq Wassan Suheil Hussain Mechanical Properties of Burnished Steel AISI 1008 |
| description |
Burnishing improves fatigue strength, surface hardness and decrease surface roughness of metal because this process transforms tensile residual stresses into compressive residual stresses. Roller burnishing tool is used in the present work on low carbon steel (AISI 1008) specimens. In this work, different experiments were used to study the influence of feed parameter and speed parameter in burnishing process on fatigue strength, surface roughness and surface hardness of low carbon steel (AISI 1008) specimens. The first parameter used is feed values which were (0.6, 0.8, and 1) mm at constant speed (370) rpm, while the second parameter used is speed at values (540, 800 and 1200) rpm and at constant feed (1) mm. The results of the fatigue test showed that improvement in fatigue limit, where the highest fatigue limit was obtained at (1mm feed, 1200rpm speed) in burnishing process which was (169 Mpa). The hardness results, showed increasing feed and speed values lead to increasing the hardness. The burnishing process reduces surface roughness by producing accurate and better surface finish. The best surface fineness of metal at (1mm feed and 1200 rpm speed) was 0.11 μm.
|
| format |
article |
| author |
Zeyad D. Kadhim Mohammed Abdulraoof Abdulrazzaq Wassan Suheil Hussain |
| author_facet |
Zeyad D. Kadhim Mohammed Abdulraoof Abdulrazzaq Wassan Suheil Hussain |
| author_sort |
Zeyad D. Kadhim |
| title |
Mechanical Properties of Burnished Steel AISI 1008 |
| title_short |
Mechanical Properties of Burnished Steel AISI 1008 |
| title_full |
Mechanical Properties of Burnished Steel AISI 1008 |
| title_fullStr |
Mechanical Properties of Burnished Steel AISI 1008 |
| title_full_unstemmed |
Mechanical Properties of Burnished Steel AISI 1008 |
| title_sort |
mechanical properties of burnished steel aisi 1008 |
| publisher |
Al-Khwarizmi College of Engineering – University of Baghdad |
| publishDate |
2018 |
| url |
https://doaj.org/article/36ab8a978e984a4997b1541b8eb7aed9 |
| work_keys_str_mv |
AT zeyaddkadhim mechanicalpropertiesofburnishedsteelaisi1008 AT mohammedabdulraoofabdulrazzaq mechanicalpropertiesofburnishedsteelaisi1008 AT wassansuheilhussain mechanicalpropertiesofburnishedsteelaisi1008 |
| _version_ |
1718399329526349824 |