Separation of copper ions by nanocomposites using adsorption process
Abstract In this research, a novel nanocomposite adsorbent, graphene oxide modified with magnetite nanoparticles and Lauric acid containing ethylenediaminetetraacetic acid (GFLE) has been applied for the eliminate of Cu2+ ions. Adsorption performance was considered as a function of solution pH, Cu2+...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Nature Portfolio
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/37297a289315495690ed158a8618bb31 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract In this research, a novel nanocomposite adsorbent, graphene oxide modified with magnetite nanoparticles and Lauric acid containing ethylenediaminetetraacetic acid (GFLE) has been applied for the eliminate of Cu2+ ions. Adsorption performance was considered as a function of solution pH, Cu2+ ions concentration (C Cu 2+), and temperature (T) and contact time (t). The levels of each variable were statistically optimized by Central Composite Design (CCD) and the response surface methodology (RSM) procedure to enhance the yield of system design. In these calculations, Y was measured as the response (the secondary concentration of Cu2+ ions in mg L−1). Highest copper adsorption occurred at time of 105 min, temperature of 40 °C, the initial concentration of 280 mg L−1, and pH = 1. The sorption equilibrium was well demonstrated using the Freundlich isotherm model. The second-order kinetics model suggested that the sorption mechanism might be ion exchange reactions. Thermodynamic factors and activation energy values displayed that the uptake process of Cu2+ ions was spontaneous, feasible, endothermic and physical in nature. Regeneration studies also revealed that GFLE could be consistently reused up to 3 cycles. |
|---|