Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor

Sulfide ions (S-2) derived from Na2S remaining in kraft black liqueur are the source of H2S gas production in recovery cycle in the Kraft pulping. In this study, we tried to prevent the production of H2S by removing the mentioned ions from black liquor using synthesized adsorbents (Cu-PAC and Cu-BWP...

Descripción completa

Guardado en:

Detalles Bibliográficos
Autores principales:	M. Mollaei, M. Moeinaddini, N. Khorasani, M. Azadfallah, A. Hemmasi
Formato:	article
Lenguaje:	FA
Publicado:	Regional Information Center for Science and Technology (RICeST) 2021
Materias:	kraft pulp and paper black liquor s-2 synthesized adsorbents Forestry SD1-669.5
Acceso en línea:	https://doaj.org/article/3d96a3eded4b4552b30a68cf66c5a362
Etiquetas:	Agregar Etiqueta Sin Etiquetas, Sea el primero en etiquetar este registro!

id	oai:doaj.org-article:3d96a3eded4b4552b30a68cf66c5a362
record_format	dspace
spelling	oai:doaj.org-article:3d96a3eded4b4552b30a68cf66c5a3622021-12-02T16:47:47ZComparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor 10.22092/IJWPR.2020.343056.16171735-09132383-112Xhttps://doaj.org/article/3d96a3eded4b4552b30a68cf66c5a3622021-02-01T00:00:00Zhttps://ijwpr.areeo.ac.ir/article_122775_08db5f46f772d737f23ab899e0e60652.pdf?lang=enhttps://doaj.org/toc/1735-0913https://doaj.org/toc/2383-112XSulfide ions (S-2) derived from Na2S remaining in kraft black liqueur are the source of H2S gas production in recovery cycle in the Kraft pulping. In this study, we tried to prevent the production of H2S by removing the mentioned ions from black liquor using synthesized adsorbents (Cu-PAC and Cu-BWP100). The adsorbents were produced by immersing activated carbon (PAC) powder and 100 mesh beech powder (BWP100) in 0.1 M solution of CuCl2. The adsorbent properties were measured before and after copper ion loading by FTIR, BET and SEM-FEI analyses. Finally, the performance of these adsorbents in the removal of S-2 from black liquor with three levels of sulfide (22%, 20 and 18) was investigated. The results of FTIR, BET and SEM-FEI analysis showed that Cu+ 2 was located on the surfaces of raw organic material without any change in their structure. Experimental data for the Cu-PAC adsorbent showed that it was more agreement with the Freundlich equation and follow to the pseudo-second-order kinetic model, whereas for Cu-BWP100 adsorbent was more consistent with the Langmuir equation and adherence to the pseudo-first-order kinetic model. The Cu-PAC adsorbent had the ability to remove 79.93% and Cu-BWP100 at 60.03% of S-2 from black liquor. The Cu-PAC, with its higher specific surface area, has a higher ability to remove S-2 from the black liquor than the Cu-BWP100. In general, the mentioned adsorbents will have a high ability to reduce H2S production by eliminating S-2.M. MollaeiM. MoeinaddiniN. KhorasaniM. AzadfallahA. HemmasiRegional Information Center for Science and Technology (RICeST)articlekraft pulp and paperblack liquors-2synthesized adsorbentsForestrySD1-669.5FAتحقیقات علوم چوب و کاغذ ایران, Vol 35, Iss 4, Pp 376-391 (2021)
institution	DOAJ
collection	DOAJ
language	FA
topic	kraft pulp and paper black liquor s-2 synthesized adsorbents Forestry SD1-669.5
spellingShingle	kraft pulp and paper black liquor s-2 synthesized adsorbents Forestry SD1-669.5 M. Mollaei M. Moeinaddini N. Khorasani M. Azadfallah A. Hemmasi Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
description	Sulfide ions (S-2) derived from Na2S remaining in kraft black liqueur are the source of H2S gas production in recovery cycle in the Kraft pulping. In this study, we tried to prevent the production of H2S by removing the mentioned ions from black liquor using synthesized adsorbents (Cu-PAC and Cu-BWP100). The adsorbents were produced by immersing activated carbon (PAC) powder and 100 mesh beech powder (BWP100) in 0.1 M solution of CuCl2. The adsorbent properties were measured before and after copper ion loading by FTIR, BET and SEM-FEI analyses. Finally, the performance of these adsorbents in the removal of S-2 from black liquor with three levels of sulfide (22%, 20 and 18) was investigated. The results of FTIR, BET and SEM-FEI analysis showed that Cu+ 2 was located on the surfaces of raw organic material without any change in their structure. Experimental data for the Cu-PAC adsorbent showed that it was more agreement with the Freundlich equation and follow to the pseudo-second-order kinetic model, whereas for Cu-BWP100 adsorbent was more consistent with the Langmuir equation and adherence to the pseudo-first-order kinetic model. The Cu-PAC adsorbent had the ability to remove 79.93% and Cu-BWP100 at 60.03% of S-2 from black liquor. The Cu-PAC, with its higher specific surface area, has a higher ability to remove S-2 from the black liquor than the Cu-BWP100. In general, the mentioned adsorbents will have a high ability to reduce H2S production by eliminating S-2.
format	article
author	M. Mollaei M. Moeinaddini N. Khorasani M. Azadfallah A. Hemmasi
author_facet	M. Mollaei M. Moeinaddini N. Khorasani M. Azadfallah A. Hemmasi
author_sort	M. Mollaei
title	Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
title_short	Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
title_full	Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
title_fullStr	Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
title_full_unstemmed	Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor
title_sort	comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (s-2) from kraft pulping black liquor
publisher	Regional Information Center for Science and Technology (RICeST)
publishDate	2021
url	https://doaj.org/article/3d96a3eded4b4552b30a68cf66c5a362
work_keys_str_mv	AT mmollaei comparisonoftheefficiencyoftwoadsorbentsactivatedcarbonandbeechwoodpowdercoppermodifiedinremovingsulfideionss2fromkraftpulpingblackliquor AT mmoeinaddini comparisonoftheefficiencyoftwoadsorbentsactivatedcarbonandbeechwoodpowdercoppermodifiedinremovingsulfideionss2fromkraftpulpingblackliquor AT nkhorasani comparisonoftheefficiencyoftwoadsorbentsactivatedcarbonandbeechwoodpowdercoppermodifiedinremovingsulfideionss2fromkraftpulpingblackliquor AT mazadfallah comparisonoftheefficiencyoftwoadsorbentsactivatedcarbonandbeechwoodpowdercoppermodifiedinremovingsulfideionss2fromkraftpulpingblackliquor AT ahemmasi comparisonoftheefficiencyoftwoadsorbentsactivatedcarbonandbeechwoodpowdercoppermodifiedinremovingsulfideionss2fromkraftpulpingblackliquor
_version_	1718383391012814848

Comparison of the efficiency of two adsorbents (activated carbon and beech wood powder copper-modified) in removing sulfide ions (S-2) from Kraft pulping black liquor

Ejemplares similares