A numerical simulation study of CO2 injection for enhancing hydrocarbon recovery and sequestration in liquid-rich shales
Abstract Less than 10% of oil is usually recovered from liquid-rich shales and this leaves much room for improvement, while water injection into shale formation is virtually impossible because of the extremely low permeability of the formation matrix. Injecting carbon dioxide (CO2) into oil shale fo...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
KeAi Communications Co., Ltd.
2017
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/3f9a4119876443caad14c36379b66888 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract Less than 10% of oil is usually recovered from liquid-rich shales and this leaves much room for improvement, while water injection into shale formation is virtually impossible because of the extremely low permeability of the formation matrix. Injecting carbon dioxide (CO2) into oil shale formations can potentially improve oil recovery. Furthermore, the large surface area in organic-rich shale could permanently store CO2 without jeopardizing the formation integrity. This work is a mechanism study of evaluating the effectiveness of CO2-enhanced oil shale recovery and shale formation CO2 sequestration capacity using numerical simulation. Petrophysical and fluid properties similar to the Bakken Formation are used to set up the base model for simulation. Result shows that the CO2 injection could increase the oil recovery factor from 7.4% to 53%. In addition, petrophysical characteristics such as in situ stress changes and presence of a natural fracture network in the shale formation are proven to have impacts on subsurface CO2 flow. A response surface modeling approach was applied to investigate the interaction between parameters and generate a proxy model for optimizing oil recovery and CO2 injectivity. |
|---|