Hydrocephalus and shunts: a comparative flow-pressure study
Introduction: Differential Pressure Shunts (DPS) for hydrocephalus work through a pressure differential between the proximal and the distal inlet. Neurosurgeon’s reference is extra-low, low, medium, normal or high-pressure valves, symbolizing the shunt’s resistance against the downstream flow. The B...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Brazilian Society for Pediatric Neurosurgery
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/4696a8a91a23444d9f678f05f1c2c1f7 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Introduction: Differential Pressure Shunts (DPS) for hydrocephalus work through a pressure differential between the proximal and the distal inlet. Neurosurgeon’s reference is extra-low, low, medium, normal or high-pressure valves, symbolizing the shunt’s resistance against the downstream flow. The Brazilian manufacturing process for all shunts is regulated by ISO 7195 version 2006, revised in 2016, and it allows a lot of flexibility in the determination of shunt resistance and flow characteristics.
Methods: This article compares the pressure-flow characteristics of some hydrocephalus shunts available in Brazil based on their information brochures
Results: Six shunt information brochures were compared regarding to CSF flow-control manufacturing graphs and/or pressure work range tables. Based on the data obtained of each valve, authors propose and introduce a comparative table that can be helpful if used as a guide to the neurosurgeon when one considers either a first time shunt implantation or a shunt revision
Conclusion: There is no standardization regarding the pressure which defines the different models of shunts available in Brazil and neurosurgeon must be aware when choosing a specific shunt and even more when, in a shunt review, choose another manufacturer. |
|---|