An Investigation on the Effects of Wind Flow on Real-Time Structural Health Monitoring With Lamb Wave-Based Technique
In this paper, the effects of wind flow on real-time structural health monitoring (SHM) with Lamb wave-based technique is studied with the dedicated experimental platform. Firstly, the environmental signal coming from the wind-induced vibration is observed at experimental conditions with different w...
Guardado en:
Autores principales: | , , |
---|---|
Formato: | article |
Lenguaje: | EN |
Publicado: |
IEEE
2021
|
Materias: | |
Acceso en línea: | https://doaj.org/article/4821a51531e3410387e59dbae736b69e |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
Sumario: | In this paper, the effects of wind flow on real-time structural health monitoring (SHM) with Lamb wave-based technique is studied with the dedicated experimental platform. Firstly, the environmental signal coming from the wind-induced vibration is observed at experimental conditions with different wind speeds by using a couple (two) of piezoelectric transducers. In order to optimize the received signal for real-time monitoring, the shunt resistor, working as the filter for the signal processing, is introduced to suppress the low-frequency noise from the wind-induced vibration. Both experimental and modeling work have been conducted to cross verify the results. Moreover, the specimen with the shunt resistor has been tested at different wind speeds condition with proper results. Furthermore, in order to verify the feasibility for practical real-time SHM, the test with only one piece of piezoelectric transducer operated as sensor and actuator simultaneously has also been conducted, and the environmental signal could be filtered as expected. The work studies the effects of wind flow on real-time SHM with Lamb wave-based technique and the signal processing method is proposed to eliminate the resultant effects, which could be applied into the real-time aircraft health monitoring. |
---|