Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp
In this study, the effect of organic complex "sulvy-x" on the optical properties of hornbeam CMP pulp bleached with hydrogen peroxide was investigated. Sulvy-x was used in two sequences silicate-free and silicate containing in hydrogen peroxide bleaching. The brightness of papers increased...
Enregistré dans:
| Auteurs principaux: | , , |
|---|---|
| Format: | article |
| Langue: | FA |
| Publié: |
Regional Information Center for Science and Technology (RICeST)
2010
|
| Sujets: | |
| Accès en ligne: | https://doaj.org/article/49461c4e74ff4c5e9a73b0ef9855a6fe |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| Résumé: | In this study, the effect of organic complex "sulvy-x" on the optical properties of hornbeam CMP pulp bleached with hydrogen peroxide was investigated. Sulvy-x was used in two sequences silicate-free and silicate containing in hydrogen peroxide bleaching. The brightness of papers increased to 60.52 and the yellowness decreased to 22.6 with increasing silicate charges up to 1% . However, at higher levels than 1% , the brightness decreased and the yellowness increased. Without dosage of sodium silicate but using 0.5% of sulvy-x, maximum brightness of 59.3% and minimum yellowness of 23.4 % ISO was achieved. In silicate-containing bleaching, combination of 0.5% sulvy-x and 0.7% sodium silicate resulted the highest brightness (60.28 % ISO) and the lowest yellowness (23 % ISO). Optimum charge of sodium hydroxide and hydrogen peroxide were determined as 2.5% and 5%.The best time for bleaching of hornbeam CMP pulp was 90 minutes in either sequences. With regard to results obtained, utilization of the organic complex of sulvy-x could be a suitable substitution for sodium silicate which produces the pulp with higher brightness and lower yellowness in conventional peroxide bleaching. |
|---|