Mechanisms of heavy metal and oil removal from synthetic saline oilfield produced water by electrocoagulation
Abstract In the present study, an electrocoagulation process was applied to treat saline oilfield-produced water. The kinetics of simultaneous heavy metal and oil removal in the saline environment under different conditions including four-electrode materials of copper, zinc, iron, and aluminum, aera...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Nature Portfolio
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/517dd5ff98544bd786a6d07c81f365a8 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract In the present study, an electrocoagulation process was applied to treat saline oilfield-produced water. The kinetics of simultaneous heavy metal and oil removal in the saline environment under different conditions including four-electrode materials of copper, zinc, iron, and aluminum, aeration and agitation rate, oil content, and salinity was investigated. The nature of the electro-generated species and possible abatement mechanisms were explored and compared by using FE-SEM/EDS, FTIR, XRD, and BET analyses. At low and high salinities, cadmium adsorption followed Langmuir and Freundlich models, suggesting the transformation of identical adsorption sites to heterogeneous ones. Cadmium removal efficiencies of 99/73% were obtained at low/high salinity with iron and 99.9 and 82% using copper and zinc electrodes in a saline environment. The cadmium adsorption capacity of different anode materials exhibited the order of copper > zinc > iron > aluminum. The adsorption capacity was considerably reduced in saline condition due to more crystalline structure and lower surface area and porosity of the particles while it was enhanced by the oil, caused by structural changes including more uniform pores, the elevated surface area, and porosity. The COD removal yield of 89% for low salinity and 80/73% at high salinity with/without aeration were achieved by iron. The highest COD removal yield of about 95% was achieved by the aluminum electrodes, compared to 85 and 87% for copper and zinc electrodes. The main removal mechanisms were outer- and inner-sphere complexation, and surface precipitation. |
|---|