Optimization and Modeling of Ammonia Nitrogen Removal from High Strength Synthetic Wastewater Using Vacuum Thermal Stripping
Waste streams with high ammonia nitrogen (NH<sub>3</sub>-N) concentrations are very commonly produced due to human intervention and often end up in waterbodies with effluent discharge. The removal of NH<sub>3</sub>-N from wastewater is therefore of utmost importance to allevi...
Guardado en:
| Autores principales: | , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
MDPI AG
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/54be87aa9eed4306b7d36fe1a9c230b5 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Waste streams with high ammonia nitrogen (NH<sub>3</sub>-N) concentrations are very commonly produced due to human intervention and often end up in waterbodies with effluent discharge. The removal of NH<sub>3</sub>-N from wastewater is therefore of utmost importance to alleviate water quality issues including eutrophication and fouling. In the present study, vacuum thermal stripping of NH<sub>3</sub>-N from high strength synthetic wastewater was conducted using a rotary evaporator and the process was optimized and modeled using response surface methodology (RSM) and RSM–artificial neural network (ANN) approaches. RSM was first employed to evaluate the process performance using three independent variables, namely pH, temperature (°C) and stripping time (min), and the optimal conditions for NH<sub>3</sub>-N removal (response) were determined. Later, the obtained data from the designed experiments of RSM were used to train the ANN for predicting the responses. NH<sub>3</sub>-N removal was found to be 97.84 ± 1.86% under the optimal conditions (pH: 9.6, temperature: 65.5 °C, and stripping time: 59.6 min) and was in good agreement with the values predicted by RSM and RSM–ANN models. A statistical comparison between the models revealed the better predictability of RSM–ANN than that of the RSM. To the best of our knowledge, this is the first attempt comparing the RSM and RSM–ANN in vacuum thermal stripping of NH<sub>3</sub>-N from wastewater. The findings of this study can therefore be useful in designing and carrying out the vacuum thermal stripping process for efficient removal of NH<sub>3</sub>-N from wastewater under different operating conditions. |
|---|