Development of titanium 3D mesh interlayer for enhancing the electrochemical performance of zinc–bromine flow battery
Abstract Zinc dendrite growth negatively affects zinc–bromine flow battery (ZBB) performance by causing membrane damage, inducing self-discharge. Herein, in a ZBB, a conventional polymer mesh was replaced with a titanium-based mesh interlayer; this provided additional abundant active sites for the Z...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Nature Portfolio
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/5a555c0f85a549f6b0a532447374efc0 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract Zinc dendrite growth negatively affects zinc–bromine flow battery (ZBB) performance by causing membrane damage, inducing self-discharge. Herein, in a ZBB, a conventional polymer mesh was replaced with a titanium-based mesh interlayer; this provided additional abundant active sites for the Zn2+/Zn redox reaction and well-developed electrolyte flow channels, which resulted in improved reaction kinetics and suppressed Zn dendrite growth. Compared with a ZBB cell comprising a conventional polymer mesh and a carbon-based electrode, the ZBB cell using the titanium mesh interlayer and a carbon-based electrode showed significantly reduced frequency of the refreshing process, which occurs at regular cycling intervals during practical use for removing residual zinc dendrites in ZBB; also, the average energy efficiency at a current density of 40 mA cm−2 increased by 38.5%. Moreover, the modified ZBB cell exhibited higher energy efficiency at a high current density of 80 mA cm−2, which is an improvement of 14.7% than in case of the contemporary polymer mesh. Consequently, this study can provide helpful insights for new anode side structures including spacer mesh for developing high-performance ZBBs. |
|---|