Reliability Assessment of Aircraft Commutators

The article describes the method of predicting the reliability and durability of an aircraft commutator, which is a primary source of electric energy in helicopters. Tests were conducted for 10 starter-generators. From this research it follows that the technical condition of brushes and bearings has...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autores principales: Wojciech Wawrzyński, Mariusz Zieja, Justyna Tomaszewska, Mariusz Michalski
Formato: article
Lenguaje:EN
Publicado: MDPI AG 2021
Materias:
T
Acceso en línea:https://doaj.org/article/62482dce5e8f4e5190a1fa8b401e7a83
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
Descripción
Sumario:The article describes the method of predicting the reliability and durability of an aircraft commutator, which is a primary source of electric energy in helicopters. Tests were conducted for 10 starter-generators. From this research it follows that the technical condition of brushes and bearings has a significant impact on the reliability of starter-generators. The reliability of starter-generators was determined based on the method consisting of two stages that was adopted: the first stage involved determining the density function of changes in diagnostic parameter depending on the operating time, but the second stage included the assessment of the reliability of bearings of the starter-generator taking into account the real flight profile. The first stage of the adopted method consisted of defining the dynamic model of changing the length of the starter-generator’s brush, which became the probabilistic model. Subsequently, based on differential equations, Fokker–Planck partial differential equation was derived, which describes the process of increasing the brush wear in a probabilistic way. This method enables the prediction of the residual durability of the helicopter’s starter-generator due to the change in a diagnostic parameter which is the wear of brushes during starter-generator operation. The second stage of this method allows determining the durability of starter-generator’s bearings building upon the average helicopter’s flight profile. Owing to the difficulty in measuring the wear of bearings, the relation between the durability of bearings and the temperature of surroundings can be applied by replacing the flight altitude with temperature. The reliability of the helicopter’s starter-generator was determined based on the serial-type reliability structure.