Hen feather: a bio-waste material for adsorptive removal of methyl red dye from aqueous solutions

This study investigates the potential applicability of hen feather (HF) to remove methyl red (MR) dye from aqueous solution with the variation of experimental conditions: contact time (1–180 min), pH (4–8), initial dye concentration (5–50 mg/L) and adsorbent dose (3–25 g/L). Scanning electron micros...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autores principales: Samina Zaman, Md. Nayeem Mehrab, Md. Shahnul Islam, Gopal Chandra Ghosh, Tapos Kumar Chakraborty
Formato: article
Lenguaje:EN
Publicado: IWA Publishing 2021
Materias:
Acceso en línea:https://doaj.org/article/6f8d8fce07e943df9bb5c4f3162697d4
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
Descripción
Sumario:This study investigates the potential applicability of hen feather (HF) to remove methyl red (MR) dye from aqueous solution with the variation of experimental conditions: contact time (1–180 min), pH (4–8), initial dye concentration (5–50 mg/L) and adsorbent dose (3–25 g/L). Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) evaluate the surface morphology and chemistry of HF, respectively. The maximum removal of MR by HF was 92% when the optimum conditions were initial MR dye concentration 5 mg/L, pH 4, adsorbent dose 7 g/L and 90 min equilibrium contact time. Langmuir isotherm (R2 = 0.98) was more suited than Freundlich isotherm (R2 = 0.96) for experimental data, and the highest monolayer adsorption capacity was 6.02 mg/g. The kinetics adsorption data fitted well to pseudo-second-order model (R2 = 0.999) and more than one process was involved during the adsorption mechanism but film diffusion was the potential rate-controlling step. The findings of the study show that HF is a very effective and low-cost adsorbent for removing MR dye from aqueous solutions. HIGHLIGHTS An adsorbent was adopted from hen feather (HF) a bio-waste material.; About 92% methyl red dye removed by HF.; Equilibrium data followed Langmuir isotherm and the highest monolayer adsorption capacity of HF was 6.02 mg/g.; Kinetic data followed pseudo-second-order kinetic.;