Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety
On the basis of a direct current magnetron, a technology has been developed for producing nanoscale-oriented nanorods from zinc oxide on an acrylic polymer. The technology makes it possible to achieve different filling of the surface with zinc oxide nanorods. The nanorods is partially fused into the...
Guardado en:
Autores principales: | , , , , , , , |
---|---|
Formato: | article |
Lenguaje: | EN |
Publicado: |
MDPI AG
2021
|
Materias: | |
Acceso en línea: | https://doaj.org/article/738e9e5f28f1439dbd9781a3fa9f4210 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
id |
oai:doaj.org-article:738e9e5f28f1439dbd9781a3fa9f4210 |
---|---|
record_format |
dspace |
spelling |
oai:doaj.org-article:738e9e5f28f1439dbd9781a3fa9f42102021-11-11T18:07:53ZAdditive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety10.3390/ma142165861996-1944https://doaj.org/article/738e9e5f28f1439dbd9781a3fa9f42102021-11-01T00:00:00Zhttps://www.mdpi.com/1996-1944/14/21/6586https://doaj.org/toc/1996-1944On the basis of a direct current magnetron, a technology has been developed for producing nanoscale-oriented nanorods from zinc oxide on an acrylic polymer. The technology makes it possible to achieve different filling of the surface with zinc oxide nanorods. The nanorods is partially fused into the polymer; the cross section of the nanorods is rather close to an elongated ellipse. It is shown that, with intense abrasion, no delamination of the nanorods from the acrylic polymer is observed. The zinc oxide nanorods abrades together with the acrylic polymer. Zinc oxide nanorods luminesces with the wavelength most preferable for the process of photosynthesis in higher plants. It was shown that plants grown under the obtained material grow faster and gain biomass faster than the control group. In addition, it was found that on surfaces containing zinc oxide nanorods, a more intense formation of such reactive oxygen species as hydrogen peroxide and hydroxyl radical is observed. Intensive formation of long-lived, active forms of the protein is observed on the zinc oxide coating. The formation of 8-oxoguanine in DNA in vitro on a zinc oxide coating was shown using ELISA method. It was found that the multiplication of microorganisms on the developed material is significantly hampered. At the same time, eukaryotic cells of animals grow and develop without hindrance. Thus, the material we have obtained can be used in photonics (photoconversion material for greenhouses, housings for LEDs), and it is also an affordable and non-toxic nanomaterial for creating antibacterial coatings.Dmitry E. BurmistrovDenis V. YanykinMark O. PaskhinEgor V. NagaevAlexey D. EfimovAndrey V. KazievDmitry G. AgeychenkovSergey V. GudkovMDPI AGarticleZnOreactive magnetron sputteringsputtering in an argon-oxygen mixturephotoconversion materialsagrophotonicsbiocompatibilityTechnologyTElectrical engineering. Electronics. Nuclear engineeringTK1-9971Engineering (General). Civil engineering (General)TA1-2040MicroscopyQH201-278.5Descriptive and experimental mechanicsQC120-168.85ENMaterials, Vol 14, Iss 6586, p 6586 (2021) |
institution |
DOAJ |
collection |
DOAJ |
language |
EN |
topic |
ZnO reactive magnetron sputtering sputtering in an argon-oxygen mixture photoconversion materials agrophotonics biocompatibility Technology T Electrical engineering. Electronics. Nuclear engineering TK1-9971 Engineering (General). Civil engineering (General) TA1-2040 Microscopy QH201-278.5 Descriptive and experimental mechanics QC120-168.85 |
spellingShingle |
ZnO reactive magnetron sputtering sputtering in an argon-oxygen mixture photoconversion materials agrophotonics biocompatibility Technology T Electrical engineering. Electronics. Nuclear engineering TK1-9971 Engineering (General). Civil engineering (General) TA1-2040 Microscopy QH201-278.5 Descriptive and experimental mechanics QC120-168.85 Dmitry E. Burmistrov Denis V. Yanykin Mark O. Paskhin Egor V. Nagaev Alexey D. Efimov Andrey V. Kaziev Dmitry G. Ageychenkov Sergey V. Gudkov Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
description |
On the basis of a direct current magnetron, a technology has been developed for producing nanoscale-oriented nanorods from zinc oxide on an acrylic polymer. The technology makes it possible to achieve different filling of the surface with zinc oxide nanorods. The nanorods is partially fused into the polymer; the cross section of the nanorods is rather close to an elongated ellipse. It is shown that, with intense abrasion, no delamination of the nanorods from the acrylic polymer is observed. The zinc oxide nanorods abrades together with the acrylic polymer. Zinc oxide nanorods luminesces with the wavelength most preferable for the process of photosynthesis in higher plants. It was shown that plants grown under the obtained material grow faster and gain biomass faster than the control group. In addition, it was found that on surfaces containing zinc oxide nanorods, a more intense formation of such reactive oxygen species as hydrogen peroxide and hydroxyl radical is observed. Intensive formation of long-lived, active forms of the protein is observed on the zinc oxide coating. The formation of 8-oxoguanine in DNA in vitro on a zinc oxide coating was shown using ELISA method. It was found that the multiplication of microorganisms on the developed material is significantly hampered. At the same time, eukaryotic cells of animals grow and develop without hindrance. Thus, the material we have obtained can be used in photonics (photoconversion material for greenhouses, housings for LEDs), and it is also an affordable and non-toxic nanomaterial for creating antibacterial coatings. |
format |
article |
author |
Dmitry E. Burmistrov Denis V. Yanykin Mark O. Paskhin Egor V. Nagaev Alexey D. Efimov Andrey V. Kaziev Dmitry G. Ageychenkov Sergey V. Gudkov |
author_facet |
Dmitry E. Burmistrov Denis V. Yanykin Mark O. Paskhin Egor V. Nagaev Alexey D. Efimov Andrey V. Kaziev Dmitry G. Ageychenkov Sergey V. Gudkov |
author_sort |
Dmitry E. Burmistrov |
title |
Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
title_short |
Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
title_full |
Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
title_fullStr |
Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
title_full_unstemmed |
Additive Production of a Material Based on an Acrylic Polymer with a Nanoscale Layer of Zno Nanorods Deposited Using a Direct Current Magnetron Discharge: Morphology, Photoconversion Properties, and Biosafety |
title_sort |
additive production of a material based on an acrylic polymer with a nanoscale layer of zno nanorods deposited using a direct current magnetron discharge: morphology, photoconversion properties, and biosafety |
publisher |
MDPI AG |
publishDate |
2021 |
url |
https://doaj.org/article/738e9e5f28f1439dbd9781a3fa9f4210 |
work_keys_str_mv |
AT dmitryeburmistrov additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT denisvyanykin additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT markopaskhin additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT egorvnagaev additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT alexeydefimov additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT andreyvkaziev additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT dmitrygageychenkov additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety AT sergeyvgudkov additiveproductionofamaterialbasedonanacrylicpolymerwithananoscalelayerofznonanorodsdepositedusingadirectcurrentmagnetrondischargemorphologyphotoconversionpropertiesandbiosafety |
_version_ |
1718431949170671616 |