Mechanical and fracture properties of steel fiber-reinforced geopolymer concrete
In this study, the effects of steel fibers on the mechanical properties of the geopolymer concrete – compressive, splitting tensile, and flexural strength; compressive elastic modulus; and fracture properties – were evaluated. Milling steel fibers were incorporated into the geopolymer concrete, and...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
De Gruyter
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/8c9846bde41f48deaf8baabef7a34806 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | In this study, the effects of steel fibers on the mechanical properties of the geopolymer concrete – compressive, splitting tensile, and flexural strength; compressive elastic modulus; and fracture properties – were evaluated. Milling steel fibers were incorporated into the geopolymer concrete, and the volume fraction of the steel fibers was varied from 0 to 2.5%. Fly ash and metakaolin were chosen as the geopolymer precursors. Fracture parameters – critical effective crack length, initial fracture toughness, and unstable fracture toughness – were measured by a three-point bending test. The results indicated that all the mechanical properties of the geopolymer concrete are remarkably improved by the steel fibers with the optimum dosage. When the steel fiber content was under 2%, the cubic and axial compressive strength and the compressive elastic modulus increased. The inclusion of 2% steel fibers enhanced the cubic and axial compressive strength and the compressive elastic modulus by 27.6, 23.7, and 47.7%, respectively. When the steel fiber content exceeded 2%, the cubic and axial compressive strength and the compressive elastic modulus decreased, having values still higher than those of the geopolymer concrete without steel fibers. The splitting tensile strength and flexural strength of the concrete were enhanced with increasing steel fiber content. When the steel fiber content was 2.5%, the increment of the splitting tensile strength was 39.8%, whereas that of the flexural strength was 134.6%. The addition of steel fibers effectively improved the fracture toughness of the geopolymer concrete. With 2.5% steel fibers, the initial fracture toughness had an increase of 27.8%, and the unstable fracture toughness increased by 12.74 times compared to that of the geopolymer concrete without the steel fibers. |
|---|