Preparation and Performance of Vanadium Tailings-Reservoir Sediment-Phosphogypsum-Based Foamed Concrete
Foamed concrete (FC) was prepared from raw materials of vanadium tailings (VTs), reservoir sediment (RS), and phosphogypsum (PG). The physicochemical properties of the raw materials were studied by using X-ray diffraction (XRD), X-ray fluorescence (XRF) analysis, and inductively coupled plasma emiss...
Enregistré dans:
| Auteurs principaux: | , , , , , , , , , , |
|---|---|
| Format: | article |
| Langue: | EN |
| Publié: |
Hindawi Limited
2021
|
| Sujets: | |
| Accès en ligne: | https://doaj.org/article/953e8643d1234dca806abcbff51d9e0b |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| Résumé: | Foamed concrete (FC) was prepared from raw materials of vanadium tailings (VTs), reservoir sediment (RS), and phosphogypsum (PG). The physicochemical properties of the raw materials were studied by using X-ray diffraction (XRD), X-ray fluorescence (XRF) analysis, and inductively coupled plasma emission spectrometer (ICP-OES). The preparation and properties of FC were investigated by particle size analysis and strength test. The hydration products and microstructure of FC were analyzed by XRD and field emission scanning electron microscopy (FE-SEM). The results show that when the specific surface area (SSA) of VTs is 768 m2·kg−1 and the content is 40%, the products with a compressive strength of 3.56 MPa and density of 619.1 kg·m−3 meet the requirements of JG/T 266-2011 standard on FC of grades A06 and C3.0; the main mineral phases in the products are calcium silicate hydrate (C-S-H) gel, ettringite (AFt), and calcite, as well as the residual mineral phases after the system reaction include quartz, orthoclase, mullite, pyrite, and PG. |
|---|