Masking Effect of LPSO Structure Phase on Wear Transition in Mg<sub>97</sub>Zn<sub>1</sub>Y<sub>2</sub> Alloy
Room- and elevated-temperature wear tests were conducted using a pin-on-disk testing machine to study wear behavior of Mg<sub>97</sub>Zn<sub>1</sub>Y<sub>2</sub> alloy and role of long-period-stacking-ordered (LPSO) structure phase in mild–severe wear transition (...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | article |
| Language: | EN |
| Published: |
MDPI AG
2021
|
| Subjects: | |
| Online Access: | https://doaj.org/article/9a7e4dfd9f3b4ea79ce75ebb1eea3bd7 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Room- and elevated-temperature wear tests were conducted using a pin-on-disk testing machine to study wear behavior of Mg<sub>97</sub>Zn<sub>1</sub>Y<sub>2</sub> alloy and role of long-period-stacking-ordered (LPSO) structure phase in mild–severe wear transition (SWT). Variation of wear rate exhibited a three-stage characteristic with load at various test temperatures, i.e., a gradual increasing stage, a slightly higher plateau stage, and a rapid rising stage. The wear mechanisms in the three stages were identified using scanning electron microscope (SEM), from which the first stage was confirmed as mild wear, and the other two stages were verified as severe wear. The interdendritic LPSO structure phase was elongated into strips along the sliding direction with Mg matrix deformation in the subsurface, plate-like LPSO structure phase precipitated at elevated temperatures of 150 and 200 °C. The fiber enhancement effect and precipitation effect of LPSO structure phase resulted in a little difference in wear rate between the first and second stages, i.e., a masking effect on SWT. Microstructure and microhardness were examined in the subsurfaces, from which the mechanism for SWT was confirmed to be dynamic recrystallization (DRX) softening. There is an apparently linear correlation between the critical load for SWT and test temperature, indicating that SWT is governed by a common critical DRX temperature. |
|---|