Integrity Analysis of the Sheath Considering Temperature Effect under Deep and Large-Scale Multi-Section Hydraulic Fracturing
Different operations make the borehole temperature change and cause periodic stresses, which often cause variations in the stress state of the sheath or damage. In this paper, the effect of temperature on sheath integrity is investigated. First, the mechanical model of sheath is established and anal...
Guardado en:
| Autores principales: | , , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
MDPI AG
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/9f0e9750eaaf45b498144035d701dd16 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Different operations make the borehole temperature change and cause periodic stresses, which often cause variations in the stress state of the sheath or damage. In this paper, the effect of temperature on sheath integrity is investigated. First, the mechanical model of sheath is established and analyzed by shakedown theory. Then, compression experiments of well cement at different temperatures are carried out, and the law of mechanical properties with temperature is obtained. Finally, combining the theoretical analysis and mechanical experiments, the results show that (1) when only the temperature inside the sheath cyclically varies, the negative influence of temperature caused by the practical operations can be negligible. (2) When the internal pressure and temperature act together, the effect of temperature on the sheath is reflected in temperature stress and the change of the cement properties. (3) With the increase of temperature difference (∆<i>T</i>), the cohesion of cement decreases while the internal friction angle increases, and the plasticity characteristics of the cement are enhanced, and the negative effect on the Pmax ascends slowly. (4) The temperature stress is in a positive relationship with the ∆<i>T</i>, and its weakening on the <i>P<sub>max</sub></i> is about 6% to 7%. (5) Combining the temperature stress and the change of the cement properties, total negative effect of temperature on the sheath accounts for 10% to 12%, when ∆<i>T</i> ranges from 60 to 110 °C. |
|---|