Research on high-temperature mechanical properties of wellhead and downhole tool steel in offshore multi-round thermal recovery
High-temperature tensile tests at 25, 150, 250, and 350°C were carried out on 30CrMo, 42CrMo, 1Cr13, and 304 steels. The changes in tensile strength, yield strength, elongation, and area reduction ratio with temperature were determined. By analyzing the fracture morphology and the relationship betwe...
Guardado en:
| Autores principales: | , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
De Gruyter
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/a261061ebfb5443eb86fee3f02fd0994 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | High-temperature tensile tests at 25, 150, 250, and 350°C were carried out on 30CrMo, 42CrMo, 1Cr13, and 304 steels. The changes in tensile strength, yield strength, elongation, and area reduction ratio with temperature were determined. By analyzing the fracture morphology and the relationship between strength and hardness, the influence of high-temperature mechanical properties on crack sensitivity and the mechanism of crack formation is discussed. Experimental results indicated that both the tensile and yield strengths of the four steels gradually decrease with the increase in temperature. The yield ratios of 30CrMo, 42CrMo, 1Cr13, and 304 steels are, respectively, 0.71–0.77, 0.79–0.86, 0.84–0.88, and 0.33–0.40 which shows that among the four steels, 304 has the best ductility, while 1Cr13 has the worst ductility. As for the four steels, the values of reduction ratio of area are greater than 60%, except for 42CrMo which is slightly lower than 60% at 150 and 250°C, indicating that the four steels have low crack sensitivity within the test temperature range. Ductile fracture is the main fracture mechanism for 30CrMo, 42CrMo, and 304 steel, whereas brittle fracture is predominant for 1Cr13. There is a linear regression relationship between the strength and hardness at different temperatures. The obtained linear regression relationship can be used to predict and estimate the strength of 30CrMo, 42CrMo, 1Cr13, and 304 steels at different temperatures according to the hardness results. |
|---|