AM PWM Driving Circuit for Mini-LED Backlight in Liquid Crystal Displays
This work proposes a mini-LED driving circuit that adopts the pulse-width modulation (PWM) driving method for use in a liquid-crystal display (LCD) backlight. The proposed circuit can compensate for the threshold voltage (<inline-formula> <tex-math notation="LaTeX">$\text{V}_{\...
Guardado en:
Autores principales: | , , , , , , , , , |
---|---|
Formato: | article |
Lenguaje: | EN |
Publicado: |
IEEE
2021
|
Materias: | |
Acceso en línea: | https://doaj.org/article/a65f27eba81b4639b0aecdd0173aca05 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
Sumario: | This work proposes a mini-LED driving circuit that adopts the pulse-width modulation (PWM) driving method for use in a liquid-crystal display (LCD) backlight. The proposed circuit can compensate for the threshold voltage (<inline-formula> <tex-math notation="LaTeX">$\text{V}_{\mathrm{ TH}}$ </tex-math></inline-formula>) variation in a low-temperature poly-crystalline silicon thin-film transistor (LTPS TFT) and a VSS current-resistance (I-R) rise, to generate a stable driving current to power the mini-LED. Since the proposed circuit uses the PWM method, the mini-LED can be operated at the best luminance-efficacy point, minimizing the power consumption of the circuit. The electrical characteristic of fabricated LTPS TFTs are measured to establish a simulation model to demonstrate the feasibility of the proposed circuit. Simulation results demonstrate that the relative mini-LED current error rates are below 9% when the <inline-formula> <tex-math notation="LaTeX">$\text{V}_{\mathrm{ TH}}$ </tex-math></inline-formula> varies ± 0.3 V and VSS rises by 1 V. With respect to precise control of the gray level, the time shifts of current pulses are within 11.48 us over the whole grayscale. The improvement in the power consumption of the proposed circuit is more than 21% than that of a circuit that is driven by pulse amplitude modulation. |
---|