An Experimental Performance on Solar Photovoltaic Thermal Collector with Nanofluids for Sustainable Development
In this article, the photovoltaic thermal collector (PVT) have designed and fabricated using nanoparticle nanofluid. The cause of this is to check out the effect of using water and water-based totally graphene nanoplatelets at an awareness of 0.05 wt% on the performance of PVT structures. Outdoor as...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Hindawi Limited
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/a693119b002944f69516f69c7de50687 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | In this article, the photovoltaic thermal collector (PVT) have designed and fabricated using nanoparticle nanofluid. The cause of this is to check out the effect of using water and water-based totally graphene nanoplatelets at an awareness of 0.05 wt% on the performance of PVT structures. Outdoor assessments have been performed at quantity along with the float prices of 0.5 L/min and 1.0 L/min for the aforementioned nanofluids, respectively, using water as a reference fluid. The results that have been analyzed from an active angle confirmed and determined that, graphene water nanofluid achieved higher in phrases of photovoltaic active conversion, than water that might generate the first-class thermal performance sooner or later of the peak period of sun radiation and high mobile temperature. The inclusion of water in the PVT collector increases average daily electrical efficiency by 7.8%, and 8.5%at flow rates of 0.5 LPM and 1.0 LPM, respectively. Furthermore, using water in the PVT collector increases average daily thermal efficiency by 24.9%, and 26.3%at flow rates of 0.5 LPM and 1.0 LPM, respectively. |
|---|