Experimental Study of Starvation and Flow Behavior in Grease-Lubricated EHD Contact
This paper describes an experimental study of starvation and flow behavior in grease-lubricated elastohydrodynamic contact. Rolling tests were conducted with four grease samples with different thickeners and base oils in a conventional ball-on-disk test rig. The EHL central film thickness was determ...
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Japanese Society of Tribologists
2015
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/ab2b7404423d49e490af9bb1eb46f693 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This paper describes an experimental study of starvation and flow behavior in grease-lubricated elastohydrodynamic contact. Rolling tests were conducted with four grease samples with different thickeners and base oils in a conventional ball-on-disk test rig. The EHL central film thickness was determined with SLIM, the Spacer Layer Imaging Method, and grease flow around the conjunction and the flow pattern on the track of the disk specimen were observed with CCD cameras. The grease track included some thickener deposited on the track and a corrugated fingerlike flow pattern outward from the center of the track. It was found that the flow pattern varied with grease type and test conditions, and that the average interval between fingers decreased with the entrainment speed. At higher speeds, inlet starvation occurred and the finger pattern was deformed and gradually ruptured. The speed of the finger-loss was higher than the speed at which starvation started. It was also found that the starvation speed was greater with greases having lower apparent viscosity at lower shear rate and higher apparent viscosity at high shear rate. This implied that the replenishment and entrainment of the greases depended on the viscosity characteristics of the greases. |
|---|