A Hybrid Mutual Coupling Reduction Technique in a Dual-Band MIMO Textile Antenna for WBAN and 5G Applications
This paper presents a hybrid mutual coupling reduction technique applied onto a dual-band textile MIMO antenna for wireless body area network and 5G applications. The MIMO antenna consists of two hexagonal patch antennas, each integrated with a split-ring (SR) and a bar slot to operate in dual-band...
Guardado en:
| Autores principales: | , , , , , , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
IEEE
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/b79de9383c004fc78b365fc7c0bfb74a |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This paper presents a hybrid mutual coupling reduction technique applied onto a dual-band textile MIMO antenna for wireless body area network and 5G applications. The MIMO antenna consists of two hexagonal patch antennas, each integrated with a split-ring (SR) and a bar slot to operate in dual-band mode at 2.45 GHz and 3.5 GHz. Each patch is dimensioned at <inline-formula> <tex-math notation="LaTeX">$47.2 \times 31$ </tex-math></inline-formula> mm<sup>2</sup>. This hybrid technique results in a simple structure, while enabling significant reduction of mutual coupling (MC) between the closely spaced patches (up to <inline-formula> <tex-math notation="LaTeX">$0.1\lambda$ </tex-math></inline-formula>). This technique combines a line patch and a patch rotation technique, explained as follows. First, a line patch is introduced at an optimized distance to enable operation with a broad impedance bandwidth at both target frequencies. One of the patches is then rotated by 90° at an optimized distance, resulting in a significant MC suppression while maintaining the dual and broad impedance bandwidth. The proposed MIMO antenna is further evaluated under several bending configurations to assess its robustness. A satisfactory agreement between simulated and measured results is observed in both planar and bending conditions. Results show that the MIMO antenna achieves an impedance bandwidth of 4.3 % and 6.79 % in the 2.45 GHz and 3.5 GHz band, respectively. Moreover, very low MC (<inline-formula> <tex-math notation="LaTeX">$S_{21} < -30$ </tex-math></inline-formula> dB) is achieved, with a low (< 0.002) envelop correlation coefficient, and about 10 dB of diversity gain at both desired frequencies using this technique. Even when bent at an angle of 50° at the <inline-formula> <tex-math notation="LaTeX">$x$ </tex-math></inline-formula>- and <inline-formula> <tex-math notation="LaTeX">$y$ </tex-math></inline-formula>-axes, the antenna bent maintained a realized gain of 1.878 dBi and 4.027 dBi in the lower and upper band, respectively. A robust performance is offered by the antenna against the lossy effects of the human body with good agreements between simulated and measured results. |
|---|