Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw

This research is aimed to study the possibility of rapeseed straw (Hayolla401) pulping and its paper characteristics, using Soda-AQ process. The average fiber length was found 1.04 millimeter and the average fiber diameter, lumen and thickness were found 28.00, 19.09, and 4.91 micrometer, respective...

Descripción completa

Guardado en:
Detalles Bibliográficos
Autores principales: Said mohammad Mazhari mosavi, Saeed Mahdavi, Syed zyaldin Hosseini, Hossein Resalti, Hossein Usefi
Formato: article
Lenguaje:FA
Publicado: Regional Information Center for Science and Technology (RICeST) 2009
Materias:
Acceso en línea:https://doaj.org/article/bccc04482c4e4b7ba847c219646f7a01
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
Descripción
Sumario:This research is aimed to study the possibility of rapeseed straw (Hayolla401) pulping and its paper characteristics, using Soda-AQ process. The average fiber length was found 1.04 millimeter and the average fiber diameter, lumen and thickness were found 28.00, 19.09, and 4.91 micrometer, respectively. Cellulose, lignin, extractive material (acetone solved) and ash were measured 41.66, 16.00, 1.63, and3.46 percent, respectively. Cooking condition was determined as follow: Soda as 16, 18, and 20 percent on the basis of rapeseed dry straw, temperature was set at 175 and 185 Cº, cooking time was set at 40 and 70 minutes, and straw to liquid ratio was set at 1/8. The amount of anthraquinone added to cooking liquor was 0.2%, based on rapeseed dry straw. Using severe cooking factors caused reduction of yield and Kappa number in both methods. Refining was performed on selected pulps in order to reach 35025     (ml,CSF) freeness. The 60 gr/m² hand sheets were made in order to determine mechanical strength and physical properties. Average thickness, density and bulk is measured at 86.4µ, 0.69gr/cm³ and 1.44cm³/gr respectively. Average tear index, burst index, breaking length and tensile indexare measured at 4.6 mN.m²/gr, 3.5 kpa.m²/gr, 7.4km and 72.6Nm/g respectively.     The results showed that however screen yield of rapeseed straw pulp is low but kappa number and mechanical properties of pulp is suitable,compared with the other agriculture residues, so Rapeseed pulp can be used in paper making industries.