On Determining the Critical Velocity in the Shot Sleeve of a High-Pressure Die Casting Machine Using Open Source CFD
This paper investigates the critical plunger velocity in high-pressure die casting during the slow phase of the piston motion and how it can be determined with computational fluid dynamics (CFD) in open source software. The melt-air system is modelled via an Eulerian volume-of-fluid approach, treati...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
MDPI AG
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/c1195a35737d4d3285fdc95763e02305 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This paper investigates the critical plunger velocity in high-pressure die casting during the slow phase of the piston motion and how it can be determined with computational fluid dynamics (CFD) in open source software. The melt-air system is modelled via an Eulerian volume-of-fluid approach, treating the air as a compressible perfect gas. The turbulence is treated via a Reynolds-averaged Navier Stokes (RANS) approach that uses the Menter SST <i>k</i>-<inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><mi>ω</mi></semantics></math></inline-formula> model. Two different strategies for mesh motion are presented and compared against each other. The solver is validated via analytical models and empirical data. A method is then presented to determine the optimal velocity using a two-dimensional (2D) mesh. As a second step, it is then discussed how the results are in line with those obtained for an actual, industrially relevant, three-dimensional (3D) geometry that also includes the ingate system of the die. |
|---|