Corrosion Effective of Condensed Synthetic Automotive Solution Containing Selective Organic Component Mixtures on Al-alloys
Abstract This work involves studying the effect of adding some selective organic component mixture on corrosion behavior of pure Al and its alloys in condensed synthetic automotive solution (CSAS) at room temperature. This mixture indicates the increasing of octane number in previous study and...
Guardado en:
Autores principales: | , , |
---|---|
Formato: | article |
Lenguaje: | EN |
Publicado: |
Al-Khwarizmi College of Engineering – University of Baghdad
2015
|
Materias: | |
Acceso en línea: | https://doaj.org/article/c7499d1cf3aa49659972106ecdc6a200 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
Sumario: | Abstract
This work involves studying the effect of adding some selective organic component mixture on corrosion behavior of pure Al and its alloys in condensed synthetic automotive solution (CSAS) at room temperature. This mixture indicates the increasing of octane number in previous study and in this study show the increasing in corrosion resistance through the decreasing in corrosion rate values.
Electrochemical measurements were carried out by potentiostat at 3 mV/sec to estimate the corrosion parameters using Tafel extrapolation method, in addition to cyclic polarization test to know the pitting susceptibility of materials in tested medium.
The cathodic Tafel slope (bc) were increased after adding the organic component mixture. But the anodic Tafel slopes (ba) were varied after addition of the mixture. The increase in cathodic slope indicates the presence of a film on the surface of the tested material, which is less permeable and can even obstruct the metal dissolution reaction but still permits an electrochemical reaction to occur. This behavior can be achieved by the electronic density on oxygen and nitrogen atoms in the organic component mixture.
Keyword: corrosion of Al- alloys, potentiostatic measurements, corrosion in fuel.
|
---|