Coffee residue-based activated carbons for phenol removal
This work was aimed to evaluate the adsorptive properties of activated carbons from coffee residue for phenol removal. The coffee residue was activated using H3PO4 and KOH, and the resultant activated carbons were characterized for surface area and functional groups. The values of surface area were...
Guardado en:
| Autores principales: | , , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
IWA Publishing
2021
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/cb61e7d0688548c09fb9b65cdcf79660 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This work was aimed to evaluate the adsorptive properties of activated carbons from coffee residue for phenol removal. The coffee residue was activated using H3PO4 and KOH, and the resultant activated carbons were characterized for surface area and functional groups. The values of surface area were recorded as 1,030 m2/g and 399 m2/g for H3PO4- and KOH-activated carbons, respectively. The maximum capacity for phenol removal is comparable for both activated carbons at 43 mg/g. The pores might be inaccessible due to electrostatic repulsion by surface functional groups and hydroxyl anions. The second stage in a two-stage adsorber design is necessary to accomplish the process with high performance and minimum dosage of activated carbon. Coffee residue is a promising activated carbon precursor for phenol removal. Highlights
Coffee residue was activated using phosphoric acid or potassium hydroxide.;
Activated coffee residue carbons exhibit phenol capacity of 43 mg/g.;
Two-stage adsorber offers insight into high performance and minimum adsorbent dosage.; |
|---|