Brittle failure criteria of CNRB specimen for fracture toughness test
This paper proposes a technique to determine the dimensions of a CNRB specimen to be used for plane fracture toughness tests. First, the brittle fracture behavior satisfying the small-scale yielding condition is investigated through an elasto-plastic analysis. The analysis parameters are the shape p...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
The Japan Society of Mechanical Engineers
2020
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/cf7366808ac14e5ab50528f88da5b978 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This paper proposes a technique to determine the dimensions of a CNRB specimen to be used for plane fracture toughness tests. First, the brittle fracture behavior satisfying the small-scale yielding condition is investigated through an elasto-plastic analysis. The analysis parameters are the shape parameters such as the notch ratio of the specimen based on the parallel part diameter and notch bottom diameter; tip radius; and notch angle. Based on the analysis results obtained, a fracture toughness test is conducted on a JIS-S45C (quenched and tempered) specimen to evaluate the small-scale yielding condition. The experimental results confirm a linear relationship between the square of the value obtained by dividing the plane-strain fracture toughness by the yield stress and specimen diameter. Further, the diameter of the CNRB specimen satisfying the small-scale yielding condition varies with the shape parameters. With these results, a function that can determine the CNRB specimen diameter at which brittle failure occurs under uniaxial tensile loading is proposed and validated. |
|---|