Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis
The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evaluate the stress distribution and the maximum strain...
Guardado en:
Autores principales: | , , , , , , , , |
---|---|
Formato: | article |
Lenguaje: | EN |
Publicado: |
MDPI AG
2021
|
Materias: | |
Acceso en línea: | https://doaj.org/article/d6b383d90a0c447b84392f61fbf4b050 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
id |
oai:doaj.org-article:d6b383d90a0c447b84392f61fbf4b050 |
---|---|
record_format |
dspace |
spelling |
oai:doaj.org-article:d6b383d90a0c447b84392f61fbf4b0502021-11-25T18:47:44ZInfluence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis10.3390/polym132238632073-4360https://doaj.org/article/d6b383d90a0c447b84392f61fbf4b0502021-11-01T00:00:00Zhttps://www.mdpi.com/2073-4360/13/22/3863https://doaj.org/toc/2073-4360The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evaluate the stress distribution and the maximum strain generated by resin cements with different elastic moduli and thicknesses used to cement resin-bonded fixed partial denture (RBFPD). A three-dimensional (3D) finite element analysis (FEA) was used, and a 3D model was created based on a Cone-Beam Computed Tomography system (CBCT). The model was analyzed by the Ansys software. The model fixation occurred at the root of the abutment teeth and an axial load of 300 N was applied on the occlusal surface of the pontic. The highest stress value was observed for the Variolink 0.4 group (1.76 × 10<sup>6</sup> Pa), while the lowest was noted for the Panavia 0.2 group (1.07 × 10<sup>6</sup> Pa). Furthermore, the highest total deformation value was found for the Variolink 0.2 group (3.36 × 10<sup>−4</sup> m), while the lowest was observed for the Panavia 0.4 group (2.33 × 10<sup>−4</sup> m). By means of this FEA, 0.2 mm layer Panavia F2.0 seemed to exhibit a more favorable stress distribution when used for cementation of posterior zirconium-dioxide-based RBFPD. However, both studied materials possessed clinically acceptable properties.Joseph AssafLouis HardanCynthia KassisRim BourgiWalter DevotoElie AmmCarol MoussaJacek SawickiMonika Lukomska-SzymanskaMDPI AGarticleadhesive prosthesiscement spacerelastic modulusfinite element analysisinlay bridgeresin cementOrganic chemistryQD241-441ENPolymers, Vol 13, Iss 3863, p 3863 (2021) |
institution |
DOAJ |
collection |
DOAJ |
language |
EN |
topic |
adhesive prosthesis cement spacer elastic modulus finite element analysis inlay bridge resin cement Organic chemistry QD241-441 |
spellingShingle |
adhesive prosthesis cement spacer elastic modulus finite element analysis inlay bridge resin cement Organic chemistry QD241-441 Joseph Assaf Louis Hardan Cynthia Kassis Rim Bourgi Walter Devoto Elie Amm Carol Moussa Jacek Sawicki Monika Lukomska-Szymanska Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
description |
The mechanical properties and the thickness of the resin cement agents used for bonding inlay bridges can modify the clinical performance of the restoration such as debonding or prosthetic materials fracture. Thus, the aim of this study was to evaluate the stress distribution and the maximum strain generated by resin cements with different elastic moduli and thicknesses used to cement resin-bonded fixed partial denture (RBFPD). A three-dimensional (3D) finite element analysis (FEA) was used, and a 3D model was created based on a Cone-Beam Computed Tomography system (CBCT). The model was analyzed by the Ansys software. The model fixation occurred at the root of the abutment teeth and an axial load of 300 N was applied on the occlusal surface of the pontic. The highest stress value was observed for the Variolink 0.4 group (1.76 × 10<sup>6</sup> Pa), while the lowest was noted for the Panavia 0.2 group (1.07 × 10<sup>6</sup> Pa). Furthermore, the highest total deformation value was found for the Variolink 0.2 group (3.36 × 10<sup>−4</sup> m), while the lowest was observed for the Panavia 0.4 group (2.33 × 10<sup>−4</sup> m). By means of this FEA, 0.2 mm layer Panavia F2.0 seemed to exhibit a more favorable stress distribution when used for cementation of posterior zirconium-dioxide-based RBFPD. However, both studied materials possessed clinically acceptable properties. |
format |
article |
author |
Joseph Assaf Louis Hardan Cynthia Kassis Rim Bourgi Walter Devoto Elie Amm Carol Moussa Jacek Sawicki Monika Lukomska-Szymanska |
author_facet |
Joseph Assaf Louis Hardan Cynthia Kassis Rim Bourgi Walter Devoto Elie Amm Carol Moussa Jacek Sawicki Monika Lukomska-Szymanska |
author_sort |
Joseph Assaf |
title |
Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
title_short |
Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
title_full |
Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
title_fullStr |
Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
title_full_unstemmed |
Influence of Resin Cement Thickness and Elastic Modulus on the Stress Distribution of Zirconium Dioxide Inlay-Bridge: 3D Finite Element Analysis |
title_sort |
influence of resin cement thickness and elastic modulus on the stress distribution of zirconium dioxide inlay-bridge: 3d finite element analysis |
publisher |
MDPI AG |
publishDate |
2021 |
url |
https://doaj.org/article/d6b383d90a0c447b84392f61fbf4b050 |
work_keys_str_mv |
AT josephassaf influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT louishardan influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT cynthiakassis influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT rimbourgi influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT walterdevoto influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT elieamm influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT carolmoussa influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT jaceksawicki influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis AT monikalukomskaszymanska influenceofresincementthicknessandelasticmodulusonthestressdistributionofzirconiumdioxideinlaybridge3dfiniteelementanalysis |
_version_ |
1718410741950709760 |