Investigation of Liquid Additives on the Nano-Hardness of NiFe during Polishing
For the optimization of polishing processes, the knowledge of the effectiveness of additives on the surface binding is essential. The nano-hardness was used as an indication for the most adequate acid used as additives. For analyzing the nano-hardness, nanoindentation tests were performed. This pape...
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | article |
| Lenguaje: | EN |
| Publicado: |
Japanese Society of Tribologists
2011
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/e890cf2a604049e5bdb8bd18c299abce |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | For the optimization of polishing processes, the knowledge of the effectiveness of additives on the surface binding is essential. The nano-hardness was used as an indication for the most adequate acid used as additives. For analyzing the nano-hardness, nanoindentation tests were performed. This paper describes the investigations on the nano-hardness of NiFe affected by hydrochloric acid (HCl) and nitric acid (HNO3) used as liquid additives during a polishing process. |
|---|