Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp
This research was accomplished in order to investigate the replacement of organic complex of Glanapone Stab with sodium silicate on optical properties of hardwood CMP pulp bleached by hydrogen peroxide. The highest brightness of 65.5% and the lowest yellowness of 21.6% was attained at silicate-free...
Guardado en:
| Autores principales: | , |
|---|---|
| Formato: | article |
| Lenguaje: | FA |
| Publicado: |
Regional Information Center for Science and Technology (RICeST)
2010
|
| Materias: | |
| Acceso en línea: | https://doaj.org/article/f954b60025e342ea80d462969cc17adb |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This research was accomplished in order to investigate the replacement of organic complex of Glanapone Stab with sodium silicate on optical properties of hardwood CMP pulp bleached by hydrogen peroxide. The highest brightness of 65.5% and the lowest yellowness of 21.6% was attained at silicate-free followed by replacement of 0.7% and 1.5% Glanapone. But the highest opacity 98.2% was gained using 0.5% glanapone. The brightness of paper increased to 68.1% and the yellowness decreased to 20.8. by adding of glanapone consumption from 0.4% to 0.5% in blended with 0.7% sodium silicate. At higher levels than 0.5% glanapone, the brightness of paper decreased and the yellowness increased. Using Higher levels of 1 and 1.5% glanapone in blended with 0.7% sodium silicate resulted the highest opacity 97.9% and 98%, respectively. Increasing of peroxide usage up to 5% at two different states of silicate-free and silicate-containing with glanapone resulted in the paper with higher brightness and lower yellowness and opacity. CMP pulps bleached at 120 minutes resulted the highest brightness of 71.1% and the lowest yellowness of 18.3% at silicate-containing state with glanapone. Maximum opacity of 98.3% and 98% were shown at bleaching time 30 minutes at two states silicate-free and silicate-containing state with glanapone, respectively. In this research with regard to optical properties in relation to paper produced from CMP pulp bleaching at two states silicate-free and silicate-containing with glanapone,it can be said that possibility of producing the paper with similar optical properties or even better using 0.7% or 1.5% at silicate-free is in compared to conventional hydrogen peroxide bleaching. Also, we could produce the paper with higher brightness along with lower yellowness and similar opacity followed by bleaching time of 120 minutes and hydrogen peroxide 5% in combination of 0.7% sodium silicate with 0.5% glanapone in compared to higher consumed values of sodium silicate. |
|---|