Using of versine and sagitta calculations for log sawing optimization, part 1: Circular cross-section
Abstract: Log sawing can be defined as a problem with obtaining squares from a cylindrical shaped raw material, log. There are traditional sawing methods such as live, cant, quarter, etc. for sawmills. However, they cant generally obtain maximum yield due to log and lumber variables for each log. Th...
Guardado en:
| Autor principal: | |
|---|---|
| Lenguaje: | English |
| Publicado: |
Universidad del Bío-Bío
2021
|
| Materias: | |
| Acceso en línea: | http://www.scielo.cl/scielo.php?script=sci_arttext&pid=S0718-221X2021000100453 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract: Log sawing can be defined as a problem with obtaining squares from a cylindrical shaped raw material, log. There are traditional sawing methods such as live, cant, quarter, etc. for sawmills. However, they cant generally obtain maximum yield due to log and lumber variables for each log. Therefore, many mathematical approaches and computer programs were improved for log sawing. In this study, suitability of two geometrical calculations, versine and sagitta, were tried for log sawing process. Logs were assumed having cylindrical shape and circular cross section. The estimation accuracy of calculations was tested for live and can’t sawing methods with in a drawing software. The results showed that one of versine equations works almost as well as the real dimensions. It is suggested that the equation can be used inside of algorithms for log sawing optimization. However, the real log defects such as taper, irregular cross-section, curvature, etc. should be considered for more realistic yield and accuracy. |
|---|