Compression behaviour of clay bricks prisms, wallets and walls - Coating influence
Abstract This work describes an experimental study carried out on running bond 195 red clay prisms, of two and three ceramic blocks, with and without cement mortar coating and some samples reinforced with mesh, subjected to axial compression in order to enhance the capacity of masonry. The prisms we...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Lenguaje: | English |
| Publicado: |
Escuela de Construcción Civil, Pontificia Universidad Católica de Chile
2019
|
| Materias: | |
| Acceso en línea: | http://www.scielo.cl/scielo.php?script=sci_arttext&pid=S0718-915X2019000100123 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Abstract This work describes an experimental study carried out on running bond 195 red clay prisms, of two and three ceramic blocks, with and without cement mortar coating and some samples reinforced with mesh, subjected to axial compression in order to enhance the capacity of masonry. The prisms were subjected to compressive loading and all of them had deformation control on each face with a deflectometer, to obtain information about the structural behaviour of the prisms. The experimental results indicate an increase both in the compressive load capacity of the coated prisms and in those that use coatings based on reinforced mortar, not complying with the specifications of conventional structural mortar. The load ratios of prism/wallettes and prisms with two blocks/prisms with three blocks were satisfactory. |
|---|