Determination of hydraulic conductivity and fines content in soils near an unlined irrigation canal in Guasave, Sinaloa, Mexico
The determination of hydraulic conductivity is essential for the assessment of fluid migration rates in the subsurface. Geoelectric methods are often used in hydrogeological studies as quick and inexpensive tools. The relation between saturated soil hydraulic conductivity (K), clay content and soil...
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Lenguaje: | English |
| Publicado: |
Chilean Society of Soil Science / Sociedad Chilena de la Ciencia del Suelo
2011
|
| Materias: | |
| Acceso en línea: | http://www.scielo.cl/scielo.php?script=sci_arttext&pid=S0718-95162011000300002 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | The determination of hydraulic conductivity is essential for the assessment of fluid migration rates in the subsurface. Geoelectric methods are often used in hydrogeological studies as quick and inexpensive tools. The relation between saturated soil hydraulic conductivity (K), clay content and soil resistivity allows an estimation of clay content and K from electrical measurements made in the field or laboratory. In this work, a methodology for estimating fines (silt+clay) content and K from electrical measurements in silt-loam soils is presented. A textural analysis was performed in 73 soil samples collected from 21 boreholes located in the municipality of Guasave, Sinaloa, Mexico, to determine the sections with a greater infiltration of water from the Valle del Fuerte irrigation canal to the local aquifer. The calculated values of texture and K were used to develop a new empirical equation, K = 0.101176 * FINES-1.62, which achieved a new relation to properly estimate the K values from the percentage of fines content. Electrical measurements were performed in the laboratory for each soil sample to determine the fines content. The K values, which were determined by a new empirical equation, showed an acceptable correlation with the values obtained by traditional techniques for silt and silt loam soils with a clay content < 35%. Water resistivity measurements were performed for samples collected from wells and flumes, showing that the water salinity of the canal is significantly lower than the groundwater. Due to the location of the Valle del Fuerte canal and soil K values, the water infiltrated from the flume into the subsoil creates a barrier preventing or slowing down the advance of the saltwater intrusion from the Sea of Cortez. Short Electrical Resistivity Tomography (ERT) profiles were carried out to determine the surface stratigraphy. The results achieved by the application of ERT and the groundwater salinity values allowed the recalculation of the geoelectrical sections in the fines content and K sections, resulting in a new, faster and less expensive procedure for the determination of hydraulic and petrophysical parameters. |
|---|