Electrochemical Immunosensor Platform Using Low-Cost ENIG PCB Finish Electrodes: Application for SARS-CoV-2 Spike Protein Sensing
In recent years, lab-on-chip systems based on printed circuit board (PCB) substrates are gaining attraction primarily due to their low cost of manufacturing. Adapting inexpensive PCBs for development of immunosensors usually requires additional processing steps such as gold electroplating and electr...
Enregistré dans:
| Auteurs principaux: | , , , |
|---|---|
| Format: | article |
| Langue: | EN |
| Publié: |
IEEE
2021
|
| Sujets: | |
| Accès en ligne: | https://doaj.org/article/aa8cc93dcbca4a66af9ca13702c7d6d5 |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| Résumé: | In recent years, lab-on-chip systems based on printed circuit board (PCB) substrates are gaining attraction primarily due to their low cost of manufacturing. Adapting inexpensive PCBs for development of immunosensors usually requires additional processing steps such as gold electroplating and electropolymerisation, that add to the manufacturing costs. In this work, we demonstrate methods to leverage electroless nickel immersion gold (ENIG) finish PCBs as electrodes for developing electrochemical immunosensors. We evaluated the performance of various parameters that impact sensor performance such as methods to clean impurities on PCB surface, optimization of redox probe concentration, and have successfully immobilized antibodies on the electrodes with cysteamine + glutaraldehyde aided process. Based on these methods, we demonstrate an application of ENIG finish PCB electrodes for detection of SARS-CoV-2 spike protein spiked in artificial saliva samples. |
|---|