Investigation on the heat transfer and evolution of temperature gradient through wood during drying; Case study: beech (Fagus orientalis) and spruce (Picea abies)
The heat transfer through three orthotropic directions and the evolution of temperature gradient in beech (Fagus orientalis) and spruce (Picea abies) during drying were investigated. Thus, due to low capacity of dryer, small flat-sawn boards with dimensions of 80 × 25 × 40 mm (L×R×T) were used. Then...
Saved in:
Main Authors: | asghar tarmian, Amir Sepehr |
---|---|
Format: | article |
Language: | FA |
Published: |
Regional Information Center for Science and Technology (RICeST)
2010
|
Subjects: | |
Online Access: | https://doaj.org/article/c9aed0832f1c4aa6b1210d79aa9275c6 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
CHARACTERIZATION OF DIFFUSIONNAL TRANSFERS OF BOUND WATER AND WATER VAPOR IN BEECH AND SPRUCE
by: MOUCHOT,N, et al.
Published: (2006) -
Evaluation the effect of kiln schedule on warp and surface checking in beech
(fagus orientalis Lipsky) at 5 cm thickness
by: Yadolah Hossein poor, et al.
Published: (2011) -
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood
by: vahid reza Safdari, et al.
Published: (2013) -
Variation in Mechanical Properties within Individual Annual Rings in the Resonance Spruce Wood (Picea abies (L.) Karst.)
by: Waldemar Moliński, et al.
Published: (2014) -
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia)
by: Asghar Tarmian, et al.
Published: (2018)